smartpro 3kva 2250w line interactive sine wave ups, extended-run & snmpwebcard options, 2u rack/tower, lcd, usb, rs232, epo, 120v model number: SMART3000RM2U description tripp lite smartpro line interactive ups with enhanced lcd interface offers network-grade power protection for critical server, network and telecommunications equipment. line interactive uninterruptible power supply (ups) with built-in auto-voltage regulation (avr) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. tripp lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. interactive lcd interface reports ups operating mode, detailed ups and site-power data, plus enables a variety of ups setup and configuration options. super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. network management interfaces support communications via usb, rs-232 and optional snmpwebcard network interface. hid-compliant usb interface enables integration with built-in power management and auto shutdown features of windows and mac os x. network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. includes poweralert monitoring software and complete cabling. switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. emergency power off (epo) interface. lcd display panel easily rotates for viewing in rackmount or tower configurations. audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. programmable self-test. field-replaceable, hot-swappable battery modules. features tripp lite SMART3000RM2U line interactive 2u rack/tower ups with 3000va / 3kva capacity (1600w maximum load with external battery packs) line interactive ups with automatic voltage regulation (avr) corrects brownouts and overvoltages from 83 to 145v nema l5-30p input plug; 8 nema 5-15/20r and 1 l5-30r output receptacles, two independently switchable output load banks maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages high 98% efficiency rating in line-power mode offers reduced power consumption and btu emisssions internal batteries offer 10 minutes at 50% load (1125w) and 3.5 minutes at 100% load (2250w) highlights 3kva / 3000va / 2250w line interactive 2u rack/tower ups, sine wave 120v output, corrects brownouts and overvoltages from 83v to 145v 0.75 power factor, interactive lcd interface extended runtime options up to 1600w 4 post compatible mounting accessories 98% line-mode efficiency, 2 switched load banks usb, rs232, epo and slot for snmpwebcard option 120v nema l5-30p input, 8 nema 5-15/20r & 1 l5-30r outlets this product is energy star qualified for its ability to save customers money while helping to protect the environment package includes SMART3000RM2U ups system poweralert software with usb, serial & epo cabling 4-post rackmount installation kit instruction manual 1 / 6
extended runtime is available with optional bp48v24-2u (limit 1), bp48v60rt-3u (multi-pack compatible) and bp48v27-2us (multi-pack compatible) external battery packs (max output de-rates to 1600 watts with external batteries) external battery configurations require the use of tripp lite's external battery configuration software (see manual) hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment front panel lcd monitoring screen with mode and enter buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed ups and site power information lcd interface also supports a number of advanced user setup and operating preferences ships with 4 post rackmount installation hardware; optional 2postrmkitwm enables 2 post rackmount/wallmount installation; optional 2-9ustand enables tower placement built-in usb, rs-232 and optional snmpwebcard accessory monitoring options hid-compliant usb interface enables integration with built-in power management and auto shutdown features of windows and mac os x included poweralert ups monitoring software; built-in emergency power off (epo) interface with cable specifications output output volt amp capacity (va) 3000 output kva capacity (kva) 3 output watt capacity (watts) 2250 output kw capacity 2.25 output power factor 0.75 output capacity details output capacity is reduced to 1600 watts in all external battery pack configurations nominal output voltage(s) supported 120v frequency compatibility 60 hz output voltage regulation (line mode) -14%, +6% output voltage regulation (battery mode) +/- 5% built-in ups output receptacles 8 5-15/20r outlet(s); 1 l5-30r outlet(s) built-in controllable switched load banks two switchable single-outlet load banks output circuit breaker two 20a output breakers protect 4 5-15/20r outlets each output ac waveform (ac mode) pure sine wave output ac waveform (battery mode) pure sine wave input rated input current (at maximum load) 24a nominal input voltage(s) supported 120v ac ups input connection type l5-30p 2 / 6
ups input cord length (ft.) 10 ups input cord length (m) 3 recommended electrical service 30a 120v phase single-phase battery full load runtime (minutes) 3.5 min. (2250w) half load runtime (minutes) 10 min. (1125w) expandable battery runtime extended runtime supported via optional external battery packs external battery pack compatibility bp48v24-2u (limit 1); bp48v60rt-3u (multi-pack compatible); bp48v27-2us (multi-pack compatible) dc system voltage (vdc) 48 battery recharge rate (included batteries) less than 4.5 hours from 10% to 90% replacement battery cartridge (internal ups battery replacement) rbc94-2u battery access front panel battery access door battery replacement description hot-swappable, user replaceable batteries voltage regulation voltage regulation description automatic voltage regulation (avr) maintains line power operation with an input voltage range of 83 to 145 overvoltage correction input voltages between 127 and 145 are reduced by 12% undervoltage correction input voltages between 108 and 96 are boosted by 12% severe undervoltage correction input voltages between 83 and 95 are boosted by 24% leds alarms & switches front panel lcd display front panel lcd information and configuration screen offers detailed ups and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed lcd configuration and monitoring options) alarms audible alarm indicates ups startup, power-failure, low-battery, overload, ups fault and remote shutdown conditions alarm cancel operation power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available switches 3 pushbutton switches control off / on power status, mode selection and mute / enter control functions surge / noise suppression ups ac suppression joule rating 570 ups ac suppression response time instantaneous emi / rfi ac noise suppression yes physical 3 / 6
installation form factors supported with included accessories 4 post 19 inch rackmount installation form factors supported with optional accessories 2 post rackmount (2postrmkitwm); wallmount (2postrmkitwm); tower (2-9ustand) primary form factor rackmount ups / power module dimensions in primary form factor (height x width x depth / inches) 3.5 x 17.5 x 19.5 ups / power module dimensions in primary form factor (height x width x depth / cm) 8.9 x 44.4 x 49.5 rack height 2u secondary form factor tower (requires 2-9ustand ) ups / power module weight (lbs) 62.8 ups / power module weight (kg) 28.5 ups shipping dimensions (height x width x depth / inches) 7.9 x 21.7 x 24.2 ups shipping dimensions (height x width x depth / cm) 20.1 x 61.5 x 62 shipping weight (lbs) 73.8 shipping weight (kg) 33.5 cooling method fan ups housing material steel environmental operating temperature range +32 to +104 degrees fahrenheit / 0 to +40 degrees celsius storage temperature range +5 to +122 degrees fahrenheit / -15 to +50 degrees celsius relative humidity 0 to 95%, non-condensing ac mode btu / hr. (full load) 189 ac mode efficiency rating (100% load) 98% operating elevation (ft.) 0-3000m / 0-10,000 ft. communications communications interface usb (hid enabled); db9 serial; slot for snmp/web interface network monitoring port description supports detailed monitoring of ups and site power conditions poweralert software included communications cable usb and db9 cabling included watchdog compatibility supports watchdog application, os and hard-reboot restart options for remote applications 4 / 6
line / battery transfer transfer time 5 milliseconds (ac to battery); 1 millisecond (battery to ac) low voltage transfer to battery power (setpoint) 83 high voltage transfer to battery power (setpoint) 145 special features grounding lug includes back panel grounding lug cold start (startup in battery mode during a power failure) cold-start operation supported high availability ups features hot swappable batteries green & high efficiency features greater than 95% efficiency - green ups; individually controllable load banks certifications ups certifications tested to ul1778 (usa); tested to csa (canada); tested to nom (mexico); meets fcc part 15 category a (emi); energy star qualified warranty product warranty period (worldwide) 2-year warranty, 3 year with registration. note: registration is required for 3-year warranty. connected equipment insurance (u.s., canada & puerto rico) $250,000 ultimate lifetime insurance related items optional products model number description qty. bp48v27-2us bp48v27-2us - 2u external 48v rack/tower battery pack for select tripp lite ups systems 1 bp48v24-2u bp48v242u - external battery pack for ups system 1 bp48v60rt-3u external battery pack and cable. 3u, expandable, blue 2-point connector 1 ct120 instant-read- ac outlet circuit tester 1 dcatv network surge suppressor - essential protection for tv/vcr coaxial lines 1 dnet1 network surge suppressor - essential protection for data and communication lines 1 dtel2 network surge suppressor - essential protection for data and communication lines 1 envirosense monitors temperature, humidity and contact-closure inputs. (requires snmpwebcard or switched pdu.) 1 pdu1220 basic pdu / power distribution unit - safe, reliable power distribution for critical networking equipment 1 ps7224-20 tripp lite power strip - multiple outlets wherever you need them 1 5 / 6
snmpwebcard for remote monitoring and control via snmp, web, or telnet. 1 u022-010 10-ft. usb2.0 a/b gold device cable (a male to b male) 1 wext5-2200-3000 5-year extended warranty - for smart line-interactive and online tower or rack models, 2200-3000va or less 1 2-9ustand enables tower placement of rackmount ups systems 1 2postrmkitwm enables 2-post rackmount or wallmount installation of select rackmount ups systems 1 more information, including related products, owner's manuals, and additional technical specifications, can be found online at: http://www.tripplite.com/sku/SMART3000RM2U . ? 2014 tripp lite. all rights reserved. all trademarks are the sole property of their respective owners. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. photos may differ slightly from final products. 6 / 6
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: tripp lite: ? SMART3000RM2U
|
